Standard-Cartridges
DN32, Length 300mm - 2000mm Filter cartridge with a sheet metal ring with a triangle gasket at the top. A perforated tube as inner support is casted at top and bottum. The end cap can either be open or closed with a 13mm diam. hole. The filter material consists of 100 % polyester. |
DN 32 x 660 Filter cartridge with cast, perforated tube at the interior and expanded metal at the outside as support element. The filter medium is a mixture of cellulose and polyester. |
JP14, JP15, JP22, JP32, Length 300mm - 2000mm Filter cartridge with a three-lug aluminium flange and cast, perforated tube as inner support. The filter material consists of 100 % polyester. The installation can be carried out from the crude gas side as well as from the clean gas side. This filter cartridge can be used at temperatures up to 200°C. |
MP15, MP15, Length 300mm - 2000mm Filter cartridge with a three-lug synthetic flange and cast, plastic tube as inner support. The filter material consists of 100 % polyester. |
ST12, ST15, ST22, ST32, Length 300mm - 2000mm Snap lock cartridge with top made from soft PU and casted perforated tube. The filter medium can be optionally cellulose, polyester or antistatic polyester. |
RD11, RD12, RD15, Length 300mm - 2000mm Screw thread cartridge with carbon steel top with inner thread and casted perforated tube. The filter medium can be optionally cellulose, polyester or antistatic polyester. |
TS12 x 600 Special cartridge design to meet the special requirements of our customers. |